Sand-water separator sand-water separator tank for sewage treatment plant grit, sand-water mixture and the precipitate was discharged sand pool water separation. Our products are designed to improve the overall domestic and international use of this type of product after solve the inconvenience and spiral strips replace the axial position of the defect is not adjustable sand-water separator for applications that require filtered water turbidity generally 5 mg / l or less able to meet drinking water quality standards for industrial use or domestic water treatment equipment to industrial and mining enterprises and towns. Industrial effluent suspended solids removal, etc. have a good effect. Flocculating suspended solids in water containing the sheet by precipitation methods can not remove the bond colloidal particles, water may be through the filter layer packed in the pressure filter, so that the water reaches transparent. Principle: The sand-water separator by shaftless spiral, lining, U-groove box, spoiler, weir and drive components. After the sand-water mixture from the top of the input end of the separator tank, a mixture of large and severe, such as sand, etc. will be deposited at the bottom of the trough, in the spiral, driven sand along the inclined U-bottom upgrade, leave the liquid Continue goes some distance in the sand dehydrated fully discharged through the discharge port to hold sand sand bucket and the water and sand separated from the overflow discharge port and sent to the factory into the pool. Features: 1, separable particle size ≥0.2mm, the separation efficiency of up to 96% to 98%; 2, using no water bearing strips for fast-loading, easy maintenance; 3, compact, light weight; 4, the new gear reducer for advanced shaft-mounted installation for the convenience; 5, equipped with nylon lining, wear and easy to replace; 6, spiral axial position is adjustable, easy to adjust its tail end and box Security clearance wall. Sales Hotline: 0317-5660287 18032703761 Website: www.chuchenqipj.com