Cast stone wetting mixer: two groups feeding spiral blade evenly into the host machine, put into the mixing tank, dry ash powder material stirred tank by means of quantitative water supply water supply forced mixing, stirring, and will comply with the requirements of the humidity material delivered to the discharge port. Cast stone humidification mixer mixing tube through its support frame fixed on the base on both sides, feeding the motor is fixed to the side of the hopper, into the cylinder is located to the lower part of the hopper, into the barrel and the mixing tube axis and with each other communication, the master at the mixing tube and into the cylinder, the main motor drives the rotation of the spindle, which is in the input and surrounding the spindle on the spindle is fixed to the barrel auger web, on stirring a uniform barrel fixedly provided with a stirring spindle stick, stir evenly on the drum set up a row of intakes, intake and intake pipe connected to the upper end of the mixing tube is also fixed a vibration motor, to avoid the humidification uneven mixing, less prone to fly ash bonding, safe and reliable . Prepare cast stone humidifier before the operation: 1) the operator must be an operating license before operation; gray tank must check whether the objects before 2), you must start at no load condition; must be checked before decelerating 3) Operation Whether the lack of oil in the machine, the other parts are lubricated properly. Operating sequence: 1) gray car transport position, the cast stone humidifier is turned on, and the sprayed water pipes open; 2) Turn on automatic unloader cinder; 3) When the ship is almost full gray car, turn off the automatic under the feeder; When the hopper is full, close the cast stone and spray humidifier water pipes closed. Sales Hotline: 0317-5660287 18032703761 Website: www.chuchenqipj.com