HMC Series pulse dust collector is a stand-alone company digestion and absorption of domestic and foreign products designed to improve after a small bag filter. Pulse jet dust collector using the cleaning mode, with cleaning effect is good, clean and efficient handling of wind capacity, long bag life, low maintenance workload, safe and reliable. HMC series single pulse dust collector is widely used in metallurgy, building materials, machinery, chemical, mining and other industrial and mining enterprises of non-fibrous dust dust purification. HMC series of pulse dust collector, there are six single specification, each size can be divided into standard with a gray bucket type A and type B open two flange (without hopper). Its structure is mainly composed of the filter chamber, filter bag, clean air chamber, ash bucket, cinder valve, pulse-jet device, electric control boxes and other components, all welded box construction, overhaul temperature rubber door seals to ensure that dust Leakage is not tight. HMC series single pulse dust collector works as follows: dusty gas from the hopper (or open the lower flange) into the filter chamber, coarse particles directly into the hopper or ash silo, dusty gas through bag filters, dust retention on the surface of the bag, the bag into the net by net gas chamber by the fan into the atmosphere. When the dust bag surface increases, leading to increased resistance of the device to the set value, the time relay (or differential pressure controller) output signal programmer to work, turn-by-pulse valves, compressed air through the vents of the bag were injection cleaning, the role of reverse flow, the sudden expansion of the bag, attached to the pocket watch dust bag fall rapidly from the hopper (or gray bin), dust discharged from the discharging valve. After all the jet dust bag, dust resume normal operation.