MC type pulse single bag filter is absorbing foreign advanced technology similar products after the baghouse through improved design. The pulse jet bag filter using high pressure (0.5-0.7Mpa) high flow valve by-pulse jet dust bag technology, compared with other domestic stand-alone, with cleaning kinetic energy, high efficiency. And small size, light weight, simple structure, easy to install, easy to maintain (external filter type), widely used in building materials, metallurgy, mining, chemical, coal, non-metallic mineral ultra-fine powder processing and other sectors of the dusty gas purification processing system, is the ideal equipment for environmental dust. MC type pulse single bag filter works: dusty gas from the air inlet into the hopper, or flanged into the bag through the open room, dusty gas through the dust bag filter for the purification of gases into the net gas chamber, and then by net gas chamber vent, drain away from the fan. Accumulated dust bag attached to the outer surface, and increase, thus increasing the resistance of bag filter, for the resistance of the device does not exceed 1200Pa, bag filter can continue to work, you need to periodically clear the dust on the bag, cleaning is timing sequence initiated by the PLC program controller pulse valve, so that the air bag in the air (0.5-0.7Mpa) ejected from the injection tube (called primary air) through the venturi tube several times in a wind-induced ambient air (known as the Second secondary air) into the bag so that the rapid expansion of the bag in an instant, and accompanied by a reverse flow of forces and shake off the dust and achieve the purpose of cleaning.